# frozen_string_literal: true
# Copyright (c) 2017-2018 THL A29 Limited, a Tencent company. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
module TencentCloud
module Cdc
module V20201214
# 购买的cbs信息
class CbsInfo < TencentCloud::Common::AbstractModel
# @param Size: cbs存储大小，单位TB
# @type Size: Integer
# @param Type: cbs存储类型，默认为SSD
# @type Type: String
attr_accessor :Size, :Type
def initialize(size=nil, type=nil)
@Size = size
@Type = type
end
def deserialize(params)
@Size = params['Size']
@Type = params['Type']
end
end
# CDC集群内cos的容量信息
class CosCapacity < TencentCloud::Common::AbstractModel
# @param TotalCapacity: 已购cos的总容量大小，单位GB
# @type TotalCapacity: Float
# @param TotalFreeCapacity: 剩余可用cos的容量大小，单位GB
# @type TotalFreeCapacity: Float
# @param TotalUsedCapacity: 已用cos的容量大小，单位GB
# @type TotalUsedCapacity: Float
attr_accessor :TotalCapacity, :TotalFreeCapacity, :TotalUsedCapacity
def initialize(totalcapacity=nil, totalfreecapacity=nil, totalusedcapacity=nil)
@TotalCapacity = totalcapacity
@TotalFreeCapacity = totalfreecapacity
@TotalUsedCapacity = totalusedcapacity
end
def deserialize(params)
@TotalCapacity = params['TotalCapacity']
@TotalFreeCapacity = params['TotalFreeCapacity']
@TotalUsedCapacity = params['TotalUsedCapacity']
end
end
# 用于购买页面添加cos信息
class CosInfo < TencentCloud::Common::AbstractModel
# @param Size: COS存储大小，单位TB
# @type Size: Integer
# @param Type: COS存储类型，默认为cos
# @type Type: String
attr_accessor :Size, :Type
def initialize(size=nil, type=nil)
@Size = size
@Type = type
end
def deserialize(params)
@Size = params['Size']
@Type = params['Type']
end
end
# CreateDedicatedClusterOrder请求参数结构体
class CreateDedicatedClusterOrderRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 专用集群id
# @type DedicatedClusterId: String
# @param DedicatedClusterTypes: order关联的专用集群类型数组
# @type DedicatedClusterTypes: Array
# @param CosInfo: order关联的cos存储信息
# @type CosInfo: :class:`Tencentcloud::Cdc.v20201214.models.CosInfo`
# @param CbsInfo: order关联的cbs存储信息
# @type CbsInfo: :class:`Tencentcloud::Cdc.v20201214.models.CbsInfo`
# @param PurchaseSource: 购买来源，默认为cloudApi
# @type PurchaseSource: String
# @param DedicatedClusterOrderId: 当调用API接口提交订单时，需要提交DedicatedClusterOrderId
# @type DedicatedClusterOrderId: String
attr_accessor :DedicatedClusterId, :DedicatedClusterTypes, :CosInfo, :CbsInfo, :PurchaseSource, :DedicatedClusterOrderId
def initialize(dedicatedclusterid=nil, dedicatedclustertypes=nil, cosinfo=nil, cbsinfo=nil, purchasesource=nil, dedicatedclusterorderid=nil)
@DedicatedClusterId = dedicatedclusterid
@DedicatedClusterTypes = dedicatedclustertypes
@CosInfo = cosinfo
@CbsInfo = cbsinfo
@PurchaseSource = purchasesource
@DedicatedClusterOrderId = dedicatedclusterorderid
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
unless params['DedicatedClusterTypes'].nil?
@DedicatedClusterTypes = []
params['DedicatedClusterTypes'].each do |i|
dedicatedclustertypeinfo_tmp = DedicatedClusterTypeInfo.new
dedicatedclustertypeinfo_tmp.deserialize(i)
@DedicatedClusterTypes << dedicatedclustertypeinfo_tmp
end
end
unless params['CosInfo'].nil?
@CosInfo = CosInfo.new
@CosInfo.deserialize(params['CosInfo'])
end
unless params['CbsInfo'].nil?
@CbsInfo = CbsInfo.new
@CbsInfo.deserialize(params['CbsInfo'])
end
@PurchaseSource = params['PurchaseSource']
@DedicatedClusterOrderId = params['DedicatedClusterOrderId']
end
end
# CreateDedicatedClusterOrder返回参数结构体
class CreateDedicatedClusterOrderResponse < TencentCloud::Common::AbstractModel
# @param DedicatedClusterOrderId: 专用集群订单id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DedicatedClusterOrderId: String
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DedicatedClusterOrderId, :RequestId
def initialize(dedicatedclusterorderid=nil, requestid=nil)
@DedicatedClusterOrderId = dedicatedclusterorderid
@RequestId = requestid
end
def deserialize(params)
@DedicatedClusterOrderId = params['DedicatedClusterOrderId']
@RequestId = params['RequestId']
end
end
# CreateDedicatedCluster请求参数结构体
class CreateDedicatedClusterRequest < TencentCloud::Common::AbstractModel
# @param SiteId: 专用集群所属的SiteId
# @type SiteId: String
# @param Name: 专用集群的名称
# @type Name: String
# @param Zone: 专用集群所属的可用区
# @type Zone: String
# @param Description: 专用集群的描述
# @type Description: String
attr_accessor :SiteId, :Name, :Zone, :Description
def initialize(siteid=nil, name=nil, zone=nil, description=nil)
@SiteId = siteid
@Name = name
@Zone = zone
@Description = description
end
def deserialize(params)
@SiteId = params['SiteId']
@Name = params['Name']
@Zone = params['Zone']
@Description = params['Description']
end
end
# CreateDedicatedCluster返回参数结构体
class CreateDedicatedClusterResponse < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 创建的专用集群id
# @type DedicatedClusterId: String
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DedicatedClusterId, :RequestId
def initialize(dedicatedclusterid=nil, requestid=nil)
@DedicatedClusterId = dedicatedclusterid
@RequestId = requestid
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
@RequestId = params['RequestId']
end
end
# CreateSite请求参数结构体
class CreateSiteRequest < TencentCloud::Common::AbstractModel
# @param Name: 站点名称
# @type Name: String
# @param Country: 站点所在国家
# @type Country: String
# @param Province: 站点所在省份
# @type Province: String
# @param City: 站点所在城市
# @type City: String
# @param AddressLine: 站点所在地区的详细地址信息
# @type AddressLine: String
# @param Description: 站点描述
# @type Description: String
# @param Note: 注意事项
# @type Note: String
# @param FiberType: 您将使用光纤类型将CDC设备连接到网络。有单模和多模两种选项。
# @type FiberType: String
# @param OpticalStandard: 您将CDC连接到网络时采用的光学标准。此字段取决于上行链路速度、光纤类型和到上游设备的距离。
# @type OpticalStandard: String
# @param PowerConnectors: 电源连接器类型
# @type PowerConnectors: String
# @param PowerFeedDrop: 从机架上方还是下方供电。
# @type PowerFeedDrop: String
# @param MaxWeight: 最大承重(KG)
# @type MaxWeight: Integer
# @param PowerDrawKva: 功耗(KW)
# @type PowerDrawKva: Integer
# @param UplinkSpeedGbps: 网络到腾讯云Region区域的上行链路速度
# @type UplinkSpeedGbps: Integer
# @param UplinkCount: 将CDC连接到网络时，每台CDC网络设备(每个机架 2 台设备)使用的上行链路数量。
# @type UplinkCount: Integer
# @param ConditionRequirement: 是否满足下面环境条件：
# 1、场地没有材料要求或验收标准会影响 CDC 设备配送和安装。
# 2、确定的机架位置包含:
# 温度范围为 41 到 104°F (5 到 40°C)。
# 湿度范围为 10°F (-12°C)和 8% RH (相对湿度)到 70°F(21°C)和 80% RH。
# 机架位置的气流方向为从前向后，且应具有足够的 CFM (每分钟立方英尺)。CFM 必须是 CDC 配置的 kVA 功耗值的 145.8 倍。
# @type ConditionRequirement: Boolean
# @param DimensionRequirement: 是否满足下面的尺寸条件：
# 您的装货站台可以容纳一个机架箱(高 x 宽 x 深 = 94" x 54" x 48")。
# 您可以提供从机架(高 x 宽 x 深 = 80" x 24" x 48")交货地点到机架最终安置位置的明确通道。测量深度时，应包括站台、走廊通道、门、转弯、坡道、货梯，并将其他通道限制考虑在内。
# 在最终的 CDC安置位置，前部间隙可以为 48" 或更大，后部间隙可以为 24" 或更大。
# @type DimensionRequirement: Boolean
# @param RedundantNetworking: 是否提供冗余的上游设备(交换机或路由器)，以便两台 网络设备都能连接到网络设备。
# @type RedundantNetworking: Boolean
# @param PostalCode: 站点所在地区的邮编
# @type PostalCode: Integer
# @param OptionalAddressLine: 站点所在地区的详细地址信息（补充）
# @type OptionalAddressLine: String
# @param NeedHelp: 是否需要腾讯云团队协助完成机架支撑工作
# @type NeedHelp: Boolean
# @param RedundantPower: 是否电源冗余
# @type RedundantPower: Boolean
# @param BreakerRequirement: 上游断路器是否具备
# @type BreakerRequirement: Boolean
attr_accessor :Name, :Country, :Province, :City, :AddressLine, :Description, :Note, :FiberType, :OpticalStandard, :PowerConnectors, :PowerFeedDrop, :MaxWeight, :PowerDrawKva, :UplinkSpeedGbps, :UplinkCount, :ConditionRequirement, :DimensionRequirement, :RedundantNetworking, :PostalCode, :OptionalAddressLine, :NeedHelp, :RedundantPower, :BreakerRequirement
def initialize(name=nil, country=nil, province=nil, city=nil, addressline=nil, description=nil, note=nil, fibertype=nil, opticalstandard=nil, powerconnectors=nil, powerfeeddrop=nil, maxweight=nil, powerdrawkva=nil, uplinkspeedgbps=nil, uplinkcount=nil, conditionrequirement=nil, dimensionrequirement=nil, redundantnetworking=nil, postalcode=nil, optionaladdressline=nil, needhelp=nil, redundantpower=nil, breakerrequirement=nil)
@Name = name
@Country = country
@Province = province
@City = city
@AddressLine = addressline
@Description = description
@Note = note
@FiberType = fibertype
@OpticalStandard = opticalstandard
@PowerConnectors = powerconnectors
@PowerFeedDrop = powerfeeddrop
@MaxWeight = maxweight
@PowerDrawKva = powerdrawkva
@UplinkSpeedGbps = uplinkspeedgbps
@UplinkCount = uplinkcount
@ConditionRequirement = conditionrequirement
@DimensionRequirement = dimensionrequirement
@RedundantNetworking = redundantnetworking
@PostalCode = postalcode
@OptionalAddressLine = optionaladdressline
@NeedHelp = needhelp
@RedundantPower = redundantpower
@BreakerRequirement = breakerrequirement
end
def deserialize(params)
@Name = params['Name']
@Country = params['Country']
@Province = params['Province']
@City = params['City']
@AddressLine = params['AddressLine']
@Description = params['Description']
@Note = params['Note']
@FiberType = params['FiberType']
@OpticalStandard = params['OpticalStandard']
@PowerConnectors = params['PowerConnectors']
@PowerFeedDrop = params['PowerFeedDrop']
@MaxWeight = params['MaxWeight']
@PowerDrawKva = params['PowerDrawKva']
@UplinkSpeedGbps = params['UplinkSpeedGbps']
@UplinkCount = params['UplinkCount']
@ConditionRequirement = params['ConditionRequirement']
@DimensionRequirement = params['DimensionRequirement']
@RedundantNetworking = params['RedundantNetworking']
@PostalCode = params['PostalCode']
@OptionalAddressLine = params['OptionalAddressLine']
@NeedHelp = params['NeedHelp']
@RedundantPower = params['RedundantPower']
@BreakerRequirement = params['BreakerRequirement']
end
end
# CreateSite返回参数结构体
class CreateSiteResponse < TencentCloud::Common::AbstractModel
# @param SiteId: 创建Site生成的id
# @type SiteId: String
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SiteId, :RequestId
def initialize(siteid=nil, requestid=nil)
@SiteId = siteid
@RequestId = requestid
end
def deserialize(params)
@SiteId = params['SiteId']
@RequestId = params['RequestId']
end
end
# 专用集群列表
class DedicatedCluster < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 专用集群id。如"cluster-xxxxx"。
# @type DedicatedClusterId: String
# @param Zone: 专用集群所属可用区名称。
# @type Zone: String
# @param Description: 专用集群的描述。
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
# @param Name: 专用集群的名称。
# @type Name: String
# @param LifecycleStatus: 专用集群的生命周期。如"PENDING"。
# @type LifecycleStatus: String
# @param CreateTime: 专用集群的创建时间。
# @type CreateTime: String
# @param SiteId: 专用集群所属的站点id。
# @type SiteId: String
attr_accessor :DedicatedClusterId, :Zone, :Description, :Name, :LifecycleStatus, :CreateTime, :SiteId
def initialize(dedicatedclusterid=nil, zone=nil, description=nil, name=nil, lifecyclestatus=nil, createtime=nil, siteid=nil)
@DedicatedClusterId = dedicatedclusterid
@Zone = zone
@Description = description
@Name = name
@LifecycleStatus = lifecyclestatus
@CreateTime = createtime
@SiteId = siteid
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
@Zone = params['Zone']
@Description = params['Description']
@Name = params['Name']
@LifecycleStatus = params['LifecycleStatus']
@CreateTime = params['CreateTime']
@SiteId = params['SiteId']
end
end
# 专用宿主机支持的实例规格列表
class DedicatedClusterInstanceType < TencentCloud::Common::AbstractModel
# @param Zone: 可用区
# @type Zone: String
# @param InstanceType: 规格名称
# @type InstanceType: String
# @param NetworkCard: 网卡类型，例如：25代表25G网卡
# @type NetworkCard: Integer
# @param Cpu: 实例的CPU核数，单位：核。
# @type Cpu: Integer
# @param Memory: 实例内存容量，单位：`GB`。
# @type Memory: Integer
# @param InstanceFamily: 实例机型系列。
# @type InstanceFamily: String
# @param TypeName: 机型名称。
# @type TypeName: String
# @param StorageBlockAmount: 本地存储块数量。
# @type StorageBlockAmount: Integer
# @param InstanceBandwidth: 内网带宽，单位Gbps。
# @type InstanceBandwidth: Float
# @param InstancePps: 网络收发包能力，单位万PPS。
# @type InstancePps: Integer
# @param CpuType: 处理器型号。
# @type CpuType: String
# @param Gpu: 实例的GPU数量。
# @type Gpu: Integer
# @param Fpga: 实例的FPGA数量。
# @type Fpga: Integer
# @param Remark: 机型描述
# @type Remark: String
# @param Status: 实例是否售卖。取值范围： <br><li>SELL：表示实例可购买<br><li>SOLD_OUT：表示实例已售罄。
# @type Status: String
attr_accessor :Zone, :InstanceType, :NetworkCard, :Cpu, :Memory, :InstanceFamily, :TypeName, :StorageBlockAmount, :InstanceBandwidth, :InstancePps, :CpuType, :Gpu, :Fpga, :Remark, :Status
def initialize(zone=nil, instancetype=nil, networkcard=nil, cpu=nil, memory=nil, instancefamily=nil, typename=nil, storageblockamount=nil, instancebandwidth=nil, instancepps=nil, cputype=nil, gpu=nil, fpga=nil, remark=nil, status=nil)
@Zone = zone
@InstanceType = instancetype
@NetworkCard = networkcard
@Cpu = cpu
@Memory = memory
@InstanceFamily = instancefamily
@TypeName = typename
@StorageBlockAmount = storageblockamount
@InstanceBandwidth = instancebandwidth
@InstancePps = instancepps
@CpuType = cputype
@Gpu = gpu
@Fpga = fpga
@Remark = remark
@Status = status
end
def deserialize(params)
@Zone = params['Zone']
@InstanceType = params['InstanceType']
@NetworkCard = params['NetworkCard']
@Cpu = params['Cpu']
@Memory = params['Memory']
@InstanceFamily = params['InstanceFamily']
@TypeName = params['TypeName']
@StorageBlockAmount = params['StorageBlockAmount']
@InstanceBandwidth = params['InstanceBandwidth']
@InstancePps = params['InstancePps']
@CpuType = params['CpuType']
@Gpu = params['Gpu']
@Fpga = params['Fpga']
@Remark = params['Remark']
@Status = params['Status']
end
end
# 专用集群订单
class DedicatedClusterOrder < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 专用集群id
# @type DedicatedClusterId: String
# @param DedicatedClusterTypeId: 专用集群类型id（移到下一层级，已经废弃，后续将删除）
# @type DedicatedClusterTypeId: String
# @param SupportedStorageType: 支持的存储类型列表（移到下一层级，已经废弃，后续将删除）
# @type SupportedStorageType: Array
# @param SupportedUplinkSpeed: 支持的上连交换机的链路传输速率(GiB)（移到下一层级，已经废弃，后续将删除）
# @type SupportedUplinkSpeed: Array
# @param SupportedInstanceFamily: 支持的实例族列表（移到下一层级，已经废弃，后续将删除）
# @type SupportedInstanceFamily: Array
# @param Weight: 地板承重要求(KG)
# @type Weight: Integer
# @param PowerDraw: 功率要求(KW)
# @type PowerDraw: Float
# @param OrderStatus: 订单状态
# @type OrderStatus: String
# @param CreateTime: 订单创建的时间
# @type CreateTime: String
# @param DedicatedClusterOrderId: 大订单ID
# @type DedicatedClusterOrderId: String
# @param Action: 订单类型，创建CREATE或扩容EXTEND
# @type Action: String
# @param DedicatedClusterOrderItems: 子订单详情列表
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DedicatedClusterOrderItems: Array
# @param Cpu: cpu值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Cpu: Integer
# @param Mem: mem值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Mem: Integer
# @param Gpu: gpu值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Gpu: Integer
# @param PayStatus: 0代表未支付，1代表已支付
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PayStatus: Integer
# @param PayType: 支付方式，一次性、按月、按年
# 注意：此字段可能返回 null，表示取不到有效值。
# @type PayType: String
# @param TimeUnit: 购买时长的单位
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimeUnit: String
# @param TimeSpan: 购买时长
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TimeSpan: Integer
# @param OrderType: 订单类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OrderType: String
# @param CheckStatus: 验收状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckStatus: String
# @param DeliverExpectTime: 交付预期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DeliverExpectTime: String
# @param DeliverFinishTime: 交付实际完成时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type DeliverFinishTime: String
# @param CheckExpectTime: 验收预期时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckExpectTime: String
# @param CheckFinishTime: 验收实际完成时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CheckFinishTime: String
# @param OrderSLA: 订单SLA
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OrderSLA: String
# @param OrderPayPlan: 订单支付计划
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OrderPayPlan: String
attr_accessor :DedicatedClusterId, :DedicatedClusterTypeId, :SupportedStorageType, :SupportedUplinkSpeed, :SupportedInstanceFamily, :Weight, :PowerDraw, :OrderStatus, :CreateTime, :DedicatedClusterOrderId, :Action, :DedicatedClusterOrderItems, :Cpu, :Mem, :Gpu, :PayStatus, :PayType, :TimeUnit, :TimeSpan, :OrderType, :CheckStatus, :DeliverExpectTime, :DeliverFinishTime, :CheckExpectTime, :CheckFinishTime, :OrderSLA, :OrderPayPlan
def initialize(dedicatedclusterid=nil, dedicatedclustertypeid=nil, supportedstoragetype=nil, supporteduplinkspeed=nil, supportedinstancefamily=nil, weight=nil, powerdraw=nil, orderstatus=nil, createtime=nil, dedicatedclusterorderid=nil, action=nil, dedicatedclusterorderitems=nil, cpu=nil, mem=nil, gpu=nil, paystatus=nil, paytype=nil, timeunit=nil, timespan=nil, ordertype=nil, checkstatus=nil, deliverexpecttime=nil, deliverfinishtime=nil, checkexpecttime=nil, checkfinishtime=nil, ordersla=nil, orderpayplan=nil)
@DedicatedClusterId = dedicatedclusterid
@DedicatedClusterTypeId = dedicatedclustertypeid
@SupportedStorageType = supportedstoragetype
@SupportedUplinkSpeed = supporteduplinkspeed
@SupportedInstanceFamily = supportedinstancefamily
@Weight = weight
@PowerDraw = powerdraw
@OrderStatus = orderstatus
@CreateTime = createtime
@DedicatedClusterOrderId = dedicatedclusterorderid
@Action = action
@DedicatedClusterOrderItems = dedicatedclusterorderitems
@Cpu = cpu
@Mem = mem
@Gpu = gpu
@PayStatus = paystatus
@PayType = paytype
@TimeUnit = timeunit
@TimeSpan = timespan
@OrderType = ordertype
@CheckStatus = checkstatus
@DeliverExpectTime = deliverexpecttime
@DeliverFinishTime = deliverfinishtime
@CheckExpectTime = checkexpecttime
@CheckFinishTime = checkfinishtime
@OrderSLA = ordersla
@OrderPayPlan = orderpayplan
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
@DedicatedClusterTypeId = params['DedicatedClusterTypeId']
@SupportedStorageType = params['SupportedStorageType']
@SupportedUplinkSpeed = params['SupportedUplinkSpeed']
@SupportedInstanceFamily = params['SupportedInstanceFamily']
@Weight = params['Weight']
@PowerDraw = params['PowerDraw']
@OrderStatus = params['OrderStatus']
@CreateTime = params['CreateTime']
@DedicatedClusterOrderId = params['DedicatedClusterOrderId']
@Action = params['Action']
unless params['DedicatedClusterOrderItems'].nil?
@DedicatedClusterOrderItems = []
params['DedicatedClusterOrderItems'].each do |i|
dedicatedclusterorderitem_tmp = DedicatedClusterOrderItem.new
dedicatedclusterorderitem_tmp.deserialize(i)
@DedicatedClusterOrderItems << dedicatedclusterorderitem_tmp
end
end
@Cpu = params['Cpu']
@Mem = params['Mem']
@Gpu = params['Gpu']
@PayStatus = params['PayStatus']
@PayType = params['PayType']
@TimeUnit = params['TimeUnit']
@TimeSpan = params['TimeSpan']
@OrderType = params['OrderType']
@CheckStatus = params['CheckStatus']
@DeliverExpectTime = params['DeliverExpectTime']
@DeliverFinishTime = params['DeliverFinishTime']
@CheckExpectTime = params['CheckExpectTime']
@CheckFinishTime = params['CheckFinishTime']
@OrderSLA = params['OrderSLA']
@OrderPayPlan = params['OrderPayPlan']
end
end
# 专用集群子订单
class DedicatedClusterOrderItem < TencentCloud::Common::AbstractModel
# @param DedicatedClusterTypeId: 专用集群类型id
# @type DedicatedClusterTypeId: String
# @param SupportedStorageType: 支持的存储类型列表
# @type SupportedStorageType: Array
# @param SupportedUplinkSpeed: 支持的上连交换机的链路传输速率(GiB)
# @type SupportedUplinkSpeed: Array
# @param SupportedInstanceFamily: 支持的实例族列表
# @type SupportedInstanceFamily: Array
# @param Weight: 地板承重要求(KG)
# @type Weight: Integer
# @param PowerDraw: 功率要求(KW)
# @type PowerDraw: Float
# @param SubOrderStatus: 订单状态
# @type SubOrderStatus: String
# @param CreateTime: 订单创建的时间
# @type CreateTime: String
# @param SubOrderId: 子订单ID
# @type SubOrderId: String
# @param Count: 关联的集群规格数量
# @type Count: Integer
# @param Name: 规格简单描述
# @type Name: String
# @param Description: 规格详细描述
# @type Description: String
# @param TotalCpu: CPU数
# @type TotalCpu: Integer
# @param TotalMem: 内存数
# @type TotalMem: Integer
# @param TotalGpu: GPU数
# @type TotalGpu: Integer
# @param TypeName: 规格英文名
# @type TypeName: String
# @param ComputeFormat: 规格展示
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ComputeFormat: String
# @param TypeFamily: 规格类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TypeFamily: String
# @param SubOrderPayStatus: 0未支付，1已支付
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SubOrderPayStatus: Integer
attr_accessor :DedicatedClusterTypeId, :SupportedStorageType, :SupportedUplinkSpeed, :SupportedInstanceFamily, :Weight, :PowerDraw, :SubOrderStatus, :CreateTime, :SubOrderId, :Count, :Name, :Description, :TotalCpu, :TotalMem, :TotalGpu, :TypeName, :ComputeFormat, :TypeFamily, :SubOrderPayStatus
def initialize(dedicatedclustertypeid=nil, supportedstoragetype=nil, supporteduplinkspeed=nil, supportedinstancefamily=nil, weight=nil, powerdraw=nil, suborderstatus=nil, createtime=nil, suborderid=nil, count=nil, name=nil, description=nil, totalcpu=nil, totalmem=nil, totalgpu=nil, typename=nil, computeformat=nil, typefamily=nil, suborderpaystatus=nil)
@DedicatedClusterTypeId = dedicatedclustertypeid
@SupportedStorageType = supportedstoragetype
@SupportedUplinkSpeed = supporteduplinkspeed
@SupportedInstanceFamily = supportedinstancefamily
@Weight = weight
@PowerDraw = powerdraw
@SubOrderStatus = suborderstatus
@CreateTime = createtime
@SubOrderId = suborderid
@Count = count
@Name = name
@Description = description
@TotalCpu = totalcpu
@TotalMem = totalmem
@TotalGpu = totalgpu
@TypeName = typename
@ComputeFormat = computeformat
@TypeFamily = typefamily
@SubOrderPayStatus = suborderpaystatus
end
def deserialize(params)
@DedicatedClusterTypeId = params['DedicatedClusterTypeId']
@SupportedStorageType = params['SupportedStorageType']
@SupportedUplinkSpeed = params['SupportedUplinkSpeed']
@SupportedInstanceFamily = params['SupportedInstanceFamily']
@Weight = params['Weight']
@PowerDraw = params['PowerDraw']
@SubOrderStatus = params['SubOrderStatus']
@CreateTime = params['CreateTime']
@SubOrderId = params['SubOrderId']
@Count = params['Count']
@Name = params['Name']
@Description = params['Description']
@TotalCpu = params['TotalCpu']
@TotalMem = params['TotalMem']
@TotalGpu = params['TotalGpu']
@TypeName = params['TypeName']
@ComputeFormat = params['ComputeFormat']
@TypeFamily = params['TypeFamily']
@SubOrderPayStatus = params['SubOrderPayStatus']
end
end
# 专用集群配置
class DedicatedClusterType < TencentCloud::Common::AbstractModel
# @param DedicatedClusterTypeId: 配置id
# @type DedicatedClusterTypeId: String
# @param Description: 配置描述，对应描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
# @param Name: 配置名称，对应计算资源类型
# @type Name: String
# @param CreateTime: 创建配置的时间
# @type CreateTime: String
# @param SupportedStorageType: 支持的存储类型列表
# @type SupportedStorageType: Array
# @param SupportedUplinkGiB: 支持的上连交换机的链路传输速率
# @type SupportedUplinkGiB: Array
# @param SupportedInstanceFamily: 支持的实例族列表
# @type SupportedInstanceFamily: Array
# @param Weight: 地板承重要求(KG)
# @type Weight: Integer
# @param PowerDrawKva: 功率要求(KW)
# @type PowerDrawKva: Float
# @param ComputeFormatDesc: 显示计算资源规格详情，存储等资源不显示
# @type ComputeFormatDesc: String
attr_accessor :DedicatedClusterTypeId, :Description, :Name, :CreateTime, :SupportedStorageType, :SupportedUplinkGiB, :SupportedInstanceFamily, :Weight, :PowerDrawKva, :ComputeFormatDesc
def initialize(dedicatedclustertypeid=nil, description=nil, name=nil, createtime=nil, supportedstoragetype=nil, supporteduplinkgib=nil, supportedinstancefamily=nil, weight=nil, powerdrawkva=nil, computeformatdesc=nil)
@DedicatedClusterTypeId = dedicatedclustertypeid
@Description = description
@Name = name
@CreateTime = createtime
@SupportedStorageType = supportedstoragetype
@SupportedUplinkGiB = supporteduplinkgib
@SupportedInstanceFamily = supportedinstancefamily
@Weight = weight
@PowerDrawKva = powerdrawkva
@ComputeFormatDesc = computeformatdesc
end
def deserialize(params)
@DedicatedClusterTypeId = params['DedicatedClusterTypeId']
@Description = params['Description']
@Name = params['Name']
@CreateTime = params['CreateTime']
@SupportedStorageType = params['SupportedStorageType']
@SupportedUplinkGiB = params['SupportedUplinkGiB']
@SupportedInstanceFamily = params['SupportedInstanceFamily']
@Weight = params['Weight']
@PowerDrawKva = params['PowerDrawKva']
@ComputeFormatDesc = params['ComputeFormatDesc']
end
end
# DedicatedClusterType => (Id, Count)
class DedicatedClusterTypeInfo < TencentCloud::Common::AbstractModel
# @param Id: 集群类型Id
# @type Id: String
# @param Count: 集群类型个数
# @type Count: Integer
attr_accessor :Id, :Count
def initialize(id=nil, count=nil)
@Id = id
@Count = count
end
def deserialize(params)
@Id = params['Id']
@Count = params['Count']
end
end
# DeleteDedicatedClusters请求参数结构体
class DeleteDedicatedClustersRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterIds: 要删除的专用集群id
# @type DedicatedClusterIds: Array
attr_accessor :DedicatedClusterIds
def initialize(dedicatedclusterids=nil)
@DedicatedClusterIds = dedicatedclusterids
end
def deserialize(params)
@DedicatedClusterIds = params['DedicatedClusterIds']
end
end
# DeleteDedicatedClusters返回参数结构体
class DeleteDedicatedClustersResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DeleteSites请求参数结构体
class DeleteSitesRequest < TencentCloud::Common::AbstractModel
# @param SiteIds: 要删除的站点id列表
# @type SiteIds: Array
attr_accessor :SiteIds
def initialize(siteids=nil)
@SiteIds = siteids
end
def deserialize(params)
@SiteIds = params['SiteIds']
end
end
# DeleteSites返回参数结构体
class DeleteSitesResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterCbsStatistics请求参数结构体
class DescribeDedicatedClusterCbsStatisticsRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 查询的专用集群id
# @type DedicatedClusterId: String
# @param SetId: 云硬盘仓库id
# @type SetId: String
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
# @param Period: 时间范围精度，1分钟/5分钟
# @type Period: String
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20
# @type Limit: Integer
attr_accessor :DedicatedClusterId, :SetId, :StartTime, :EndTime, :Period, :Offset, :Limit
def initialize(dedicatedclusterid=nil, setid=nil, starttime=nil, endtime=nil, period=nil, offset=nil, limit=nil)
@DedicatedClusterId = dedicatedclusterid
@SetId = setid
@StartTime = starttime
@EndTime = endtime
@Period = period
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
@SetId = params['SetId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Period = params['Period']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDedicatedClusterCbsStatistics返回参数结构体
class DescribeDedicatedClusterCbsStatisticsResponse < TencentCloud::Common::AbstractModel
# @param SetList: 云硬盘仓库信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SetList: Array
# @param TotalCount: 总数
# 注意：此字段可能返回 null，表示取不到有效值。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SetList, :TotalCount, :RequestId
def initialize(setlist=nil, totalcount=nil, requestid=nil)
@SetList = setlist
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['SetList'].nil?
@SetList = []
params['SetList'].each do |i|
setinfo_tmp = SetInfo.new
setinfo_tmp.deserialize(i)
@SetList << setinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterCosCapacity请求参数结构体
class DescribeDedicatedClusterCosCapacityRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 查询的专用集群id
# @type DedicatedClusterId: String
attr_accessor :DedicatedClusterId
def initialize(dedicatedclusterid=nil)
@DedicatedClusterId = dedicatedclusterid
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
end
end
# DescribeDedicatedClusterCosCapacity返回参数结构体
class DescribeDedicatedClusterCosCapacityResponse < TencentCloud::Common::AbstractModel
# @param CosCapacity: 本集群内cos容量信息，单位：‘GB’
# @type CosCapacity: :class:`Tencentcloud::Cdc.v20201214.models.CosCapacity`
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CosCapacity, :RequestId
def initialize(coscapacity=nil, requestid=nil)
@CosCapacity = coscapacity
@RequestId = requestid
end
def deserialize(params)
unless params['CosCapacity'].nil?
@CosCapacity = CosCapacity.new
@CosCapacity.deserialize(params['CosCapacity'])
end
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterHostStatistics请求参数结构体
class DescribeDedicatedClusterHostStatisticsRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 查询的专用集群id
# @type DedicatedClusterId: String
# @param HostId: 宿主机id
# @type HostId: String
# @param StartTime: 开始时间
# @type StartTime: String
# @param EndTime: 结束时间
# @type EndTime: String
# @param Period: 时间范围精度，1分钟/5分钟
# @type Period: String
attr_accessor :DedicatedClusterId, :HostId, :StartTime, :EndTime, :Period
def initialize(dedicatedclusterid=nil, hostid=nil, starttime=nil, endtime=nil, period=nil)
@DedicatedClusterId = dedicatedclusterid
@HostId = hostid
@StartTime = starttime
@EndTime = endtime
@Period = period
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
@HostId = params['HostId']
@StartTime = params['StartTime']
@EndTime = params['EndTime']
@Period = params['Period']
end
end
# DescribeDedicatedClusterHostStatistics返回参数结构体
class DescribeDedicatedClusterHostStatisticsResponse < TencentCloud::Common::AbstractModel
# @param HostStatisticSet: 该集群内宿主机的统计信息列表
# @type HostStatisticSet: Array
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :HostStatisticSet, :RequestId
def initialize(hoststatisticset=nil, requestid=nil)
@HostStatisticSet = hoststatisticset
@RequestId = requestid
end
def deserialize(params)
unless params['HostStatisticSet'].nil?
@HostStatisticSet = []
params['HostStatisticSet'].each do |i|
hoststatistic_tmp = HostStatistic.new
hoststatistic_tmp.deserialize(i)
@HostStatisticSet << hoststatistic_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterHosts请求参数结构体
class DescribeDedicatedClusterHostsRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 集群id
# @type DedicatedClusterId: String
# @param Offset: 偏移量，默认为0。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20
# @type Limit: Integer
attr_accessor :DedicatedClusterId, :Offset, :Limit
def initialize(dedicatedclusterid=nil, offset=nil, limit=nil)
@DedicatedClusterId = dedicatedclusterid
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDedicatedClusterHosts返回参数结构体
class DescribeDedicatedClusterHostsResponse < TencentCloud::Common::AbstractModel
# @param HostInfoSet: 宿主机信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostInfoSet: Array
# @param TotalCount: 宿主机总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :HostInfoSet, :TotalCount, :RequestId
def initialize(hostinfoset=nil, totalcount=nil, requestid=nil)
@HostInfoSet = hostinfoset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['HostInfoSet'].nil?
@HostInfoSet = []
params['HostInfoSet'].each do |i|
hostinfo_tmp = HostInfo.new
hostinfo_tmp.deserialize(i)
@HostInfoSet << hostinfo_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterInstanceTypes请求参数结构体
class DescribeDedicatedClusterInstanceTypesRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 查询的专用集群id
# @type DedicatedClusterId: String
attr_accessor :DedicatedClusterId
def initialize(dedicatedclusterid=nil)
@DedicatedClusterId = dedicatedclusterid
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
end
end
# DescribeDedicatedClusterInstanceTypes返回参数结构体
class DescribeDedicatedClusterInstanceTypesResponse < TencentCloud::Common::AbstractModel
# @param DedicatedClusterInstanceTypeSet: 支持的实例规格列表
# @type DedicatedClusterInstanceTypeSet: Array
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DedicatedClusterInstanceTypeSet, :RequestId
def initialize(dedicatedclusterinstancetypeset=nil, requestid=nil)
@DedicatedClusterInstanceTypeSet = dedicatedclusterinstancetypeset
@RequestId = requestid
end
def deserialize(params)
unless params['DedicatedClusterInstanceTypeSet'].nil?
@DedicatedClusterInstanceTypeSet = []
params['DedicatedClusterInstanceTypeSet'].each do |i|
dedicatedclusterinstancetype_tmp = DedicatedClusterInstanceType.new
dedicatedclusterinstancetype_tmp.deserialize(i)
@DedicatedClusterInstanceTypeSet << dedicatedclusterinstancetype_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterOrders请求参数结构体
class DescribeDedicatedClusterOrdersRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterIds: 按照专用集群id过滤
# @type DedicatedClusterIds: Array
# @param DedicatedClusterOrderIds: 按照专用集群订单id过滤
# @type DedicatedClusterOrderIds: String
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
# @param Status: 订单状态为过滤条件：PENDING INCONSTRUCTION DELIVERING DELIVERED EXPIRED CANCELLED OFFLINE
# @type Status: String
# @param ActionType: 订单类型为过滤条件：CREATE EXTEND
# @type ActionType: String
# @param OrderTypes: 订单类型列表
# @type OrderTypes: Array
attr_accessor :DedicatedClusterIds, :DedicatedClusterOrderIds, :Offset, :Limit, :Status, :ActionType, :OrderTypes
def initialize(dedicatedclusterids=nil, dedicatedclusterorderids=nil, offset=nil, limit=nil, status=nil, actiontype=nil, ordertypes=nil)
@DedicatedClusterIds = dedicatedclusterids
@DedicatedClusterOrderIds = dedicatedclusterorderids
@Offset = offset
@Limit = limit
@Status = status
@ActionType = actiontype
@OrderTypes = ordertypes
end
def deserialize(params)
@DedicatedClusterIds = params['DedicatedClusterIds']
@DedicatedClusterOrderIds = params['DedicatedClusterOrderIds']
@Offset = params['Offset']
@Limit = params['Limit']
@Status = params['Status']
@ActionType = params['ActionType']
@OrderTypes = params['OrderTypes']
end
end
# DescribeDedicatedClusterOrders返回参数结构体
class DescribeDedicatedClusterOrdersResponse < TencentCloud::Common::AbstractModel
# @param DedicatedClusterOrderSet: 专用集群订单列表
# @type DedicatedClusterOrderSet: Array
# @param TotalCount: 符合条件的专用集群订单总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DedicatedClusterOrderSet, :TotalCount, :RequestId
def initialize(dedicatedclusterorderset=nil, totalcount=nil, requestid=nil)
@DedicatedClusterOrderSet = dedicatedclusterorderset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DedicatedClusterOrderSet'].nil?
@DedicatedClusterOrderSet = []
params['DedicatedClusterOrderSet'].each do |i|
dedicatedclusterorder_tmp = DedicatedClusterOrder.new
dedicatedclusterorder_tmp.deserialize(i)
@DedicatedClusterOrderSet << dedicatedclusterorder_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterOverview请求参数结构体
class DescribeDedicatedClusterOverviewRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 集群id
# @type DedicatedClusterId: String
attr_accessor :DedicatedClusterId
def initialize(dedicatedclusterid=nil)
@DedicatedClusterId = dedicatedclusterid
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
end
end
# DescribeDedicatedClusterOverview返回参数结构体
class DescribeDedicatedClusterOverviewResponse < TencentCloud::Common::AbstractModel
# @param CvmCount: 云服务器数量
# @type CvmCount: Integer
# @param HostCount: 宿主机数量
# @type HostCount: Integer
# @param VpnConnectionState: vpn通道状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpnConnectionState: String
# @param VpngwBandwidthData: vpn网关监控数据
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpngwBandwidthData: :class:`Tencentcloud::Cdc.v20201214.models.VpngwBandwidthData`
# @param LocalNetInfo: 本地网关信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LocalNetInfo: :class:`Tencentcloud::Cdc.v20201214.models.LocalNetInfo`
# @param VpnConnectionBandwidthData: vpn网关通道监控数据
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpnConnectionBandwidthData: Array
# @param HostDetailInfo: 宿主机资源概览信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostDetailInfo: Array
# @param HostStandbyCount: 热备宿主机数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostStandbyCount: Integer
# @param HostNormalCount: 普通宿主机数量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostNormalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :CvmCount, :HostCount, :VpnConnectionState, :VpngwBandwidthData, :LocalNetInfo, :VpnConnectionBandwidthData, :HostDetailInfo, :HostStandbyCount, :HostNormalCount, :RequestId
def initialize(cvmcount=nil, hostcount=nil, vpnconnectionstate=nil, vpngwbandwidthdata=nil, localnetinfo=nil, vpnconnectionbandwidthdata=nil, hostdetailinfo=nil, hoststandbycount=nil, hostnormalcount=nil, requestid=nil)
@CvmCount = cvmcount
@HostCount = hostcount
@VpnConnectionState = vpnconnectionstate
@VpngwBandwidthData = vpngwbandwidthdata
@LocalNetInfo = localnetinfo
@VpnConnectionBandwidthData = vpnconnectionbandwidthdata
@HostDetailInfo = hostdetailinfo
@HostStandbyCount = hoststandbycount
@HostNormalCount = hostnormalcount
@RequestId = requestid
end
def deserialize(params)
@CvmCount = params['CvmCount']
@HostCount = params['HostCount']
@VpnConnectionState = params['VpnConnectionState']
unless params['VpngwBandwidthData'].nil?
@VpngwBandwidthData = VpngwBandwidthData.new
@VpngwBandwidthData.deserialize(params['VpngwBandwidthData'])
end
unless params['LocalNetInfo'].nil?
@LocalNetInfo = LocalNetInfo.new
@LocalNetInfo.deserialize(params['LocalNetInfo'])
end
unless params['VpnConnectionBandwidthData'].nil?
@VpnConnectionBandwidthData = []
params['VpnConnectionBandwidthData'].each do |i|
vpngwbandwidthdata_tmp = VpngwBandwidthData.new
vpngwbandwidthdata_tmp.deserialize(i)
@VpnConnectionBandwidthData << vpngwbandwidthdata_tmp
end
end
unless params['HostDetailInfo'].nil?
@HostDetailInfo = []
params['HostDetailInfo'].each do |i|
hostdetailinfo_tmp = HostDetailInfo.new
hostdetailinfo_tmp.deserialize(i)
@HostDetailInfo << hostdetailinfo_tmp
end
end
@HostStandbyCount = params['HostStandbyCount']
@HostNormalCount = params['HostNormalCount']
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusterTypes请求参数结构体
class DescribeDedicatedClusterTypesRequest < TencentCloud::Common::AbstractModel
# @param Name: 模糊匹配专用集群配置名称
# @type Name: String
# @param DedicatedClusterTypeIds: 待查询的专用集群配置id列表
# @type DedicatedClusterTypeIds: Array
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
# @param IsCompute: 是否只查询计算规格类型
# @type IsCompute: Boolean
attr_accessor :Name, :DedicatedClusterTypeIds, :Offset, :Limit, :IsCompute
def initialize(name=nil, dedicatedclustertypeids=nil, offset=nil, limit=nil, iscompute=nil)
@Name = name
@DedicatedClusterTypeIds = dedicatedclustertypeids
@Offset = offset
@Limit = limit
@IsCompute = iscompute
end
def deserialize(params)
@Name = params['Name']
@DedicatedClusterTypeIds = params['DedicatedClusterTypeIds']
@Offset = params['Offset']
@Limit = params['Limit']
@IsCompute = params['IsCompute']
end
end
# DescribeDedicatedClusterTypes返回参数结构体
class DescribeDedicatedClusterTypesResponse < TencentCloud::Common::AbstractModel
# @param DedicatedClusterTypeSet: 专用集群配置列表
# @type DedicatedClusterTypeSet: Array
# @param TotalCount: 符合条件的个数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DedicatedClusterTypeSet, :TotalCount, :RequestId
def initialize(dedicatedclustertypeset=nil, totalcount=nil, requestid=nil)
@DedicatedClusterTypeSet = dedicatedclustertypeset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DedicatedClusterTypeSet'].nil?
@DedicatedClusterTypeSet = []
params['DedicatedClusterTypeSet'].each do |i|
dedicatedclustertype_tmp = DedicatedClusterType.new
dedicatedclustertype_tmp.deserialize(i)
@DedicatedClusterTypeSet << dedicatedclustertype_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDedicatedClusters请求参数结构体
class DescribeDedicatedClustersRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterIds: 按照一个或者多个实例ID查询。实例ID形如：`cluster-xxxxxxxx`
# @type DedicatedClusterIds: Array
# @param Zones: 按照可用区名称过滤
# @type Zones: Array
# @param SiteIds: 按照站点id过滤
# @type SiteIds: Array
# @param LifecycleStatuses: 按照专用集群生命周期过滤
# @type LifecycleStatuses: Array
# @param Name: 模糊匹配专用集群名称
# @type Name: String
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
attr_accessor :DedicatedClusterIds, :Zones, :SiteIds, :LifecycleStatuses, :Name, :Offset, :Limit
def initialize(dedicatedclusterids=nil, zones=nil, siteids=nil, lifecyclestatuses=nil, name=nil, offset=nil, limit=nil)
@DedicatedClusterIds = dedicatedclusterids
@Zones = zones
@SiteIds = siteids
@LifecycleStatuses = lifecyclestatuses
@Name = name
@Offset = offset
@Limit = limit
end
def deserialize(params)
@DedicatedClusterIds = params['DedicatedClusterIds']
@Zones = params['Zones']
@SiteIds = params['SiteIds']
@LifecycleStatuses = params['LifecycleStatuses']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeDedicatedClusters返回参数结构体
class DescribeDedicatedClustersResponse < TencentCloud::Common::AbstractModel
# @param DedicatedClusterSet: 符合查询条件的专用集群列表
# @type DedicatedClusterSet: Array
# @param TotalCount: 符合条件的专用集群数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :DedicatedClusterSet, :TotalCount, :RequestId
def initialize(dedicatedclusterset=nil, totalcount=nil, requestid=nil)
@DedicatedClusterSet = dedicatedclusterset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['DedicatedClusterSet'].nil?
@DedicatedClusterSet = []
params['DedicatedClusterSet'].each do |i|
dedicatedcluster_tmp = DedicatedCluster.new
dedicatedcluster_tmp.deserialize(i)
@DedicatedClusterSet << dedicatedcluster_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeDedicatedSupportedZones请求参数结构体
class DescribeDedicatedSupportedZonesRequest < TencentCloud::Common::AbstractModel
# @param Regions: 传入region列表
# @type Regions: Array
attr_accessor :Regions
def initialize(regions=nil)
@Regions = regions
end
def deserialize(params)
@Regions = params['Regions']
end
end
# DescribeDedicatedSupportedZones返回参数结构体
class DescribeDedicatedSupportedZonesResponse < TencentCloud::Common::AbstractModel
# @param ZoneSet: 支持的可用区列表
# @type ZoneSet: Array
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :ZoneSet, :RequestId
def initialize(zoneset=nil, requestid=nil)
@ZoneSet = zoneset
@RequestId = requestid
end
def deserialize(params)
unless params['ZoneSet'].nil?
@ZoneSet = []
params['ZoneSet'].each do |i|
regionzoneinfo_tmp = RegionZoneInfo.new
regionzoneinfo_tmp.deserialize(i)
@ZoneSet << regionzoneinfo_tmp
end
end
@RequestId = params['RequestId']
end
end
# DescribeSitesDetail请求参数结构体
class DescribeSitesDetailRequest < TencentCloud::Common::AbstractModel
# @param SiteIds: 按照站点id过滤
# @type SiteIds: Array
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
# @param Name: 按照站定名称模糊匹配
# @type Name: String
attr_accessor :SiteIds, :Offset, :Limit, :Name
def initialize(siteids=nil, offset=nil, limit=nil, name=nil)
@SiteIds = siteids
@Offset = offset
@Limit = limit
@Name = name
end
def deserialize(params)
@SiteIds = params['SiteIds']
@Offset = params['Offset']
@Limit = params['Limit']
@Name = params['Name']
end
end
# DescribeSitesDetail返回参数结构体
class DescribeSitesDetailResponse < TencentCloud::Common::AbstractModel
# @param SiteDetailSet: 站点详情
# @type SiteDetailSet: Array
# @param TotalCount: 符合条件的站点总数
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SiteDetailSet, :TotalCount, :RequestId
def initialize(sitedetailset=nil, totalcount=nil, requestid=nil)
@SiteDetailSet = sitedetailset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['SiteDetailSet'].nil?
@SiteDetailSet = []
params['SiteDetailSet'].each do |i|
sitedetail_tmp = SiteDetail.new
sitedetail_tmp.deserialize(i)
@SiteDetailSet << sitedetail_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# DescribeSites请求参数结构体
class DescribeSitesRequest < TencentCloud::Common::AbstractModel
# @param SiteIds: 按照站点id过滤
# @type SiteIds: Array
# @param Name: 模糊匹配站点名称
# @type Name: String
# @param Offset: 偏移量，默认为0。关于`Offset`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Offset: Integer
# @param Limit: 返回数量，默认为20，最大值为100。关于`Limit`的更进一步介绍请参考 API [简介](https://cloud.tencent.com/document/api/213/15688)中的相关小节。
# @type Limit: Integer
attr_accessor :SiteIds, :Name, :Offset, :Limit
def initialize(siteids=nil, name=nil, offset=nil, limit=nil)
@SiteIds = siteids
@Name = name
@Offset = offset
@Limit = limit
end
def deserialize(params)
@SiteIds = params['SiteIds']
@Name = params['Name']
@Offset = params['Offset']
@Limit = params['Limit']
end
end
# DescribeSites返回参数结构体
class DescribeSitesResponse < TencentCloud::Common::AbstractModel
# @param SiteSet: 符合查询条件的站点列表
# @type SiteSet: Array
# @param TotalCount: 符合条件的站点数量。
# @type TotalCount: Integer
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :SiteSet, :TotalCount, :RequestId
def initialize(siteset=nil, totalcount=nil, requestid=nil)
@SiteSet = siteset
@TotalCount = totalcount
@RequestId = requestid
end
def deserialize(params)
unless params['SiteSet'].nil?
@SiteSet = []
params['SiteSet'].each do |i|
site_tmp = Site.new
site_tmp.deserialize(i)
@SiteSet << site_tmp
end
end
@TotalCount = params['TotalCount']
@RequestId = params['RequestId']
end
end
# 带有时间戳的详细数据。
class DetailData < TencentCloud::Common::AbstractModel
# @param Timestamps: 时间戳
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Timestamps: Array
# @param Values: 对应的具体值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Values: Array
attr_accessor :Timestamps, :Values
def initialize(timestamps=nil, values=nil)
@Timestamps = timestamps
@Values = values
end
def deserialize(params)
@Timestamps = params['Timestamps']
@Values = params['Values']
end
end
# 宿主机资源的概览详细信息。
class HostDetailInfo < TencentCloud::Common::AbstractModel
# @param HostTypeFamily: 类型族
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostTypeFamily: String
# @param CpuTotal: 总CPU
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuTotal: Float
# @param CpuAvailable: 可用CPU
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuAvailable: Float
# @param MemTotal: 总内存
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MemTotal: Float
# @param MemAvailable: 可用内存
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MemAvailable: Float
attr_accessor :HostTypeFamily, :CpuTotal, :CpuAvailable, :MemTotal, :MemAvailable
def initialize(hosttypefamily=nil, cputotal=nil, cpuavailable=nil, memtotal=nil, memavailable=nil)
@HostTypeFamily = hosttypefamily
@CpuTotal = cputotal
@CpuAvailable = cpuavailable
@MemTotal = memtotal
@MemAvailable = memavailable
end
def deserialize(params)
@HostTypeFamily = params['HostTypeFamily']
@CpuTotal = params['CpuTotal']
@CpuAvailable = params['CpuAvailable']
@MemTotal = params['MemTotal']
@MemAvailable = params['MemAvailable']
end
end
# CDC宿主机的详细信息
class HostInfo < TencentCloud::Common::AbstractModel
# @param HostIp: 宿主机IP（废弃）
# @type HostIp: String
# @param ServiceType: 云服务类型
# @type ServiceType: String
# @param HostStatus: 宿主机运行状态
# @type HostStatus: String
# @param HostType: 宿主机类型
# @type HostType: String
# @param CpuAvailable: cpu可用数
# @type CpuAvailable: Integer
# @param CpuTotal: cpu总数
# @type CpuTotal: Integer
# @param MemAvailable: 内存可用数
# @type MemAvailable: Integer
# @param MemTotal: 内存总数
# @type MemTotal: Integer
# @param RunTime: 运行时间
# @type RunTime: String
# @param ExpireTime: 到期时间
# @type ExpireTime: String
# @param HostId: 宿主机id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type HostId: String
attr_accessor :HostIp, :ServiceType, :HostStatus, :HostType, :CpuAvailable, :CpuTotal, :MemAvailable, :MemTotal, :RunTime, :ExpireTime, :HostId
def initialize(hostip=nil, servicetype=nil, hoststatus=nil, hosttype=nil, cpuavailable=nil, cputotal=nil, memavailable=nil, memtotal=nil, runtime=nil, expiretime=nil, hostid=nil)
@HostIp = hostip
@ServiceType = servicetype
@HostStatus = hoststatus
@HostType = hosttype
@CpuAvailable = cpuavailable
@CpuTotal = cputotal
@MemAvailable = memavailable
@MemTotal = memtotal
@RunTime = runtime
@ExpireTime = expiretime
@HostId = hostid
end
def deserialize(params)
@HostIp = params['HostIp']
@ServiceType = params['ServiceType']
@HostStatus = params['HostStatus']
@HostType = params['HostType']
@CpuAvailable = params['CpuAvailable']
@CpuTotal = params['CpuTotal']
@MemAvailable = params['MemAvailable']
@MemTotal = params['MemTotal']
@RunTime = params['RunTime']
@ExpireTime = params['ExpireTime']
@HostId = params['HostId']
end
end
# CDC集群内宿主机的统计信息
class HostStatistic < TencentCloud::Common::AbstractModel
# @param HostType: 宿主机规格
# @type HostType: String
# @param HostFamily: 宿主机机型系列
# @type HostFamily: String
# @param Cpu: 宿主机的CPU核数，单位：核
# @type Cpu: Integer
# @param Memory: 宿主机内存大小，单位：GB
# @type Memory: Integer
# @param Count: 该规格宿主机的数量
# @type Count: Integer
# @param CpuAverage: 平均cpu负载百分比
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuAverage: Float
# @param MemAverage: 平均内存使用率百分比
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MemAverage: Float
# @param NetAverage: 平均网络流量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetAverage: Float
# @param CpuDetailData: cpu详细监控数据
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CpuDetailData: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param MemDetailData: 内存详细数据
# 注意：此字段可能返回 null，表示取不到有效值。
# @type MemDetailData: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param NetRateDetailData: 网络速率详细数据
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetRateDetailData: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param NetPacketDetailData: 网速包详细数据
# 注意：此字段可能返回 null，表示取不到有效值。
# @type NetPacketDetailData: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
attr_accessor :HostType, :HostFamily, :Cpu, :Memory, :Count, :CpuAverage, :MemAverage, :NetAverage, :CpuDetailData, :MemDetailData, :NetRateDetailData, :NetPacketDetailData
def initialize(hosttype=nil, hostfamily=nil, cpu=nil, memory=nil, count=nil, cpuaverage=nil, memaverage=nil, netaverage=nil, cpudetaildata=nil, memdetaildata=nil, netratedetaildata=nil, netpacketdetaildata=nil)
@HostType = hosttype
@HostFamily = hostfamily
@Cpu = cpu
@Memory = memory
@Count = count
@CpuAverage = cpuaverage
@MemAverage = memaverage
@NetAverage = netaverage
@CpuDetailData = cpudetaildata
@MemDetailData = memdetaildata
@NetRateDetailData = netratedetaildata
@NetPacketDetailData = netpacketdetaildata
end
def deserialize(params)
@HostType = params['HostType']
@HostFamily = params['HostFamily']
@Cpu = params['Cpu']
@Memory = params['Memory']
@Count = params['Count']
@CpuAverage = params['CpuAverage']
@MemAverage = params['MemAverage']
@NetAverage = params['NetAverage']
unless params['CpuDetailData'].nil?
@CpuDetailData = DetailData.new
@CpuDetailData.deserialize(params['CpuDetailData'])
end
unless params['MemDetailData'].nil?
@MemDetailData = DetailData.new
@MemDetailData.deserialize(params['MemDetailData'])
end
unless params['NetRateDetailData'].nil?
@NetRateDetailData = DetailData.new
@NetRateDetailData.deserialize(params['NetRateDetailData'])
end
unless params['NetPacketDetailData'].nil?
@NetPacketDetailData = DetailData.new
@NetPacketDetailData.deserialize(params['NetPacketDetailData'])
end
end
end
# 入带宽数据
class InBandwidth < TencentCloud::Common::AbstractModel
# @param Timestamps: 时间戳
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Timestamps: Array
# @param Values: 时间对应的值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Values: Array
attr_accessor :Timestamps, :Values
def initialize(timestamps=nil, values=nil)
@Timestamps = timestamps
@Values = values
end
def deserialize(params)
@Timestamps = params['Timestamps']
@Values = params['Values']
end
end
# 本地网络信息
class LocalNetInfo < TencentCloud::Common::AbstractModel
# @param Protocol: 协议
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Protocol: String
# @param VpcId: 网络id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type VpcId: String
# @param BGPRoute: 路由信息
# 注意：此字段可能返回 null，表示取不到有效值。
# @type BGPRoute: String
# @param LocalIp: 本地IP
# 注意：此字段可能返回 null，表示取不到有效值。
# @type LocalIp: String
attr_accessor :Protocol, :VpcId, :BGPRoute, :LocalIp
def initialize(protocol=nil, vpcid=nil, bgproute=nil, localip=nil)
@Protocol = protocol
@VpcId = vpcid
@BGPRoute = bgproute
@LocalIp = localip
end
def deserialize(params)
@Protocol = params['Protocol']
@VpcId = params['VpcId']
@BGPRoute = params['BGPRoute']
@LocalIp = params['LocalIp']
end
end
# ModifyDedicatedClusterInfo请求参数结构体
class ModifyDedicatedClusterInfoRequest < TencentCloud::Common::AbstractModel
# @param DedicatedClusterId: 本地专用集群ID
# @type DedicatedClusterId: String
# @param Name: 集群的新名称
# @type Name: String
# @param Zone: 集群的新可用区
# @type Zone: String
# @param Description: 集群的新描述信息
# @type Description: String
# @param SiteId: 集群所在站点
# @type SiteId: String
attr_accessor :DedicatedClusterId, :Name, :Zone, :Description, :SiteId
def initialize(dedicatedclusterid=nil, name=nil, zone=nil, description=nil, siteid=nil)
@DedicatedClusterId = dedicatedclusterid
@Name = name
@Zone = zone
@Description = description
@SiteId = siteid
end
def deserialize(params)
@DedicatedClusterId = params['DedicatedClusterId']
@Name = params['Name']
@Zone = params['Zone']
@Description = params['Description']
@SiteId = params['SiteId']
end
end
# ModifyDedicatedClusterInfo返回参数结构体
class ModifyDedicatedClusterInfoResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifyOrderStatus请求参数结构体
class ModifyOrderStatusRequest < TencentCloud::Common::AbstractModel
# @param Status: 要更新成的状态
# @type Status: String
# @param DedicatedClusterOrderId: 大订单ID
# @type DedicatedClusterOrderId: String
# @param SubOrderIds: 小订单ID
# @type SubOrderIds: Array
attr_accessor :Status, :DedicatedClusterOrderId, :SubOrderIds
def initialize(status=nil, dedicatedclusterorderid=nil, suborderids=nil)
@Status = status
@DedicatedClusterOrderId = dedicatedclusterorderid
@SubOrderIds = suborderids
end
def deserialize(params)
@Status = params['Status']
@DedicatedClusterOrderId = params['DedicatedClusterOrderId']
@SubOrderIds = params['SubOrderIds']
end
end
# ModifyOrderStatus返回参数结构体
class ModifyOrderStatusResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifySiteDeviceInfo请求参数结构体
class ModifySiteDeviceInfoRequest < TencentCloud::Common::AbstractModel
# @param SiteId: 机房ID
# @type SiteId: String
# @param FiberType: 您将使用光纤类型将CDC设备连接到网络。有单模和多模两种选项。
# @type FiberType: String
# @param OpticalStandard: 您将CDC连接到网络时采用的光学标准。此字段取决于上行链路速度、光纤类型和到上游设备的距离。
# @type OpticalStandard: String
# @param PowerConnectors: 电源连接器类型
# @type PowerConnectors: String
# @param PowerFeedDrop: 从机架上方还是下方供电。
# @type PowerFeedDrop: String
# @param MaxWeight: 最大承重(KG)
# @type MaxWeight: Integer
# @param PowerDrawKva: 功耗(KW)
# @type PowerDrawKva: Integer
# @param UplinkSpeedGbps: 网络到腾讯云Region区域的上行链路速度
# @type UplinkSpeedGbps: Integer
# @param UplinkCount: 将CDC连接到网络时，每台CDC网络设备(每个机架 2 台设备)使用的上行链路数量。
# @type UplinkCount: Integer
# @param ConditionRequirement: 是否满足下面环境条件：
# 1、场地没有材料要求或验收标准会影响 CDC 设备配送和安装。
# 2、确定的机架位置包含:
# 温度范围为 41 到 104°F (5 到 40°C)。
# 湿度范围为 10°F (-12°C)和 8% RH (相对湿度)到 70°F(21°C)和 80% RH。
# 机架位置的气流方向为从前向后，且应具有足够的 CFM (每分钟立方英尺)，散热功率须达到CDC运行功率值的 145.8 倍以上。
# @type ConditionRequirement: Boolean
# @param DimensionRequirement: 是否满足下面的尺寸条件：
# 您的装货站台可以容纳一个机架箱(高 x 宽 x 深 = 94" x 54" x 48")。
# 您可以提供从机架(高 x 宽 x 深 = 80" x 24" x 48")交货地点到机架最终安置位置的明确通道。测量深度时，应包括站台、走廊通道、门、转弯、坡道、货梯，并将其他通道限制考虑在内。
# 在最终的 CDC安置位置，前部间隙可以为 48" 或更大，后部间隙可以为 24" 或更大。
# @type DimensionRequirement: Boolean
# @param RedundantNetworking: 是否提供冗余的上游设备(交换机或路由器)，以便实现网络出口的高可用。
# @type RedundantNetworking: Boolean
# @param NeedHelp: 是否需要腾讯云团队协助完成机架支撑工作
# @type NeedHelp: Boolean
# @param RedundantPower: 是否电源冗余
# @type RedundantPower: Boolean
# @param BreakerRequirement: 上游断路器是否具备
# @type BreakerRequirement: Boolean
attr_accessor :SiteId, :FiberType, :OpticalStandard, :PowerConnectors, :PowerFeedDrop, :MaxWeight, :PowerDrawKva, :UplinkSpeedGbps, :UplinkCount, :ConditionRequirement, :DimensionRequirement, :RedundantNetworking, :NeedHelp, :RedundantPower, :BreakerRequirement
def initialize(siteid=nil, fibertype=nil, opticalstandard=nil, powerconnectors=nil, powerfeeddrop=nil, maxweight=nil, powerdrawkva=nil, uplinkspeedgbps=nil, uplinkcount=nil, conditionrequirement=nil, dimensionrequirement=nil, redundantnetworking=nil, needhelp=nil, redundantpower=nil, breakerrequirement=nil)
@SiteId = siteid
@FiberType = fibertype
@OpticalStandard = opticalstandard
@PowerConnectors = powerconnectors
@PowerFeedDrop = powerfeeddrop
@MaxWeight = maxweight
@PowerDrawKva = powerdrawkva
@UplinkSpeedGbps = uplinkspeedgbps
@UplinkCount = uplinkcount
@ConditionRequirement = conditionrequirement
@DimensionRequirement = dimensionrequirement
@RedundantNetworking = redundantnetworking
@NeedHelp = needhelp
@RedundantPower = redundantpower
@BreakerRequirement = breakerrequirement
end
def deserialize(params)
@SiteId = params['SiteId']
@FiberType = params['FiberType']
@OpticalStandard = params['OpticalStandard']
@PowerConnectors = params['PowerConnectors']
@PowerFeedDrop = params['PowerFeedDrop']
@MaxWeight = params['MaxWeight']
@PowerDrawKva = params['PowerDrawKva']
@UplinkSpeedGbps = params['UplinkSpeedGbps']
@UplinkCount = params['UplinkCount']
@ConditionRequirement = params['ConditionRequirement']
@DimensionRequirement = params['DimensionRequirement']
@RedundantNetworking = params['RedundantNetworking']
@NeedHelp = params['NeedHelp']
@RedundantPower = params['RedundantPower']
@BreakerRequirement = params['BreakerRequirement']
end
end
# ModifySiteDeviceInfo返回参数结构体
class ModifySiteDeviceInfoResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# ModifySiteInfo请求参数结构体
class ModifySiteInfoRequest < TencentCloud::Common::AbstractModel
# @param SiteId: 机房ID
# @type SiteId: String
# @param Name: 站点名称
# @type Name: String
# @param Description: 站点描述
# @type Description: String
# @param Note: 注意事项
# @type Note: String
# @param Country: 站点所在国家
# @type Country: String
# @param Province: 站点所在省份
# @type Province: String
# @param City: 站点所在城市
# @type City: String
# @param PostalCode: 站点所在地区的邮编
# @type PostalCode: String
# @param AddressLine: 站点所在地区的详细地址信息
# @type AddressLine: String
attr_accessor :SiteId, :Name, :Description, :Note, :Country, :Province, :City, :PostalCode, :AddressLine
def initialize(siteid=nil, name=nil, description=nil, note=nil, country=nil, province=nil, city=nil, postalcode=nil, addressline=nil)
@SiteId = siteid
@Name = name
@Description = description
@Note = note
@Country = country
@Province = province
@City = city
@PostalCode = postalcode
@AddressLine = addressline
end
def deserialize(params)
@SiteId = params['SiteId']
@Name = params['Name']
@Description = params['Description']
@Note = params['Note']
@Country = params['Country']
@Province = params['Province']
@City = params['City']
@PostalCode = params['PostalCode']
@AddressLine = params['AddressLine']
end
end
# ModifySiteInfo返回参数结构体
class ModifySiteInfoResponse < TencentCloud::Common::AbstractModel
# @param RequestId: 唯一请求 ID，由服务端生成，每次请求都会返回（若请求因其他原因未能抵达服务端，则该次请求不会获得 RequestId）。定位问题时需要提供该次请求的 RequestId。
# @type RequestId: String
attr_accessor :RequestId
def initialize(requestid=nil)
@RequestId = requestid
end
def deserialize(params)
@RequestId = params['RequestId']
end
end
# 出带宽数据。
class OutBandwidth < TencentCloud::Common::AbstractModel
# @param Timestamps: 时间戳
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Timestamps: Array
# @param Values: 对应时间的值
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Values: Array
attr_accessor :Timestamps, :Values
def initialize(timestamps=nil, values=nil)
@Timestamps = timestamps
@Values = values
end
def deserialize(params)
@Timestamps = params['Timestamps']
@Values = params['Values']
end
end
# RegionZoneInfo信息
class RegionZoneInfo < TencentCloud::Common::AbstractModel
# @param RegionId: Region id
# @type RegionId: Integer
# @param Zones: ZoneInfo数组
# @type Zones: Array
attr_accessor :RegionId, :Zones
def initialize(regionid=nil, zones=nil)
@RegionId = regionid
@Zones = zones
end
def deserialize(params)
@RegionId = params['RegionId']
unless params['Zones'].nil?
@Zones = []
params['Zones'].each do |i|
zoneinfo_tmp = ZoneInfo.new
zoneinfo_tmp.deserialize(i)
@Zones << zoneinfo_tmp
end
end
end
end
# 云硬盘的仓库级别信息
class SetInfo < TencentCloud::Common::AbstractModel
# @param SetId: 云硬盘仓库id
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SetId: String
# @param SetName: 云硬盘仓库名称
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SetName: String
# @param SetType: 云硬盘仓库类型
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SetType: String
# @param SetSize: 云硬盘仓库容量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SetSize: Float
# @param SetStatus: 云硬盘仓库状态
# 注意：此字段可能返回 null，表示取不到有效值。
# @type SetStatus: String
# @param CreateTime: 云硬盘仓库创建时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type CreateTime: String
# @param ReadTraffic: 读流量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReadTraffic: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param WriteTraffic: 写流量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WriteTraffic: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param ReadIO: 读IO
# 注意：此字段可能返回 null，表示取不到有效值。
# @type ReadIO: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param WriteIO: 写IO
# 注意：此字段可能返回 null，表示取不到有效值。
# @type WriteIO: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param Await: 平均等待时间
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Await: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
# @param Util: 利用率
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Util: :class:`Tencentcloud::Cdc.v20201214.models.DetailData`
attr_accessor :SetId, :SetName, :SetType, :SetSize, :SetStatus, :CreateTime, :ReadTraffic, :WriteTraffic, :ReadIO, :WriteIO, :Await, :Util
def initialize(setid=nil, setname=nil, settype=nil, setsize=nil, setstatus=nil, createtime=nil, readtraffic=nil, writetraffic=nil, readio=nil, writeio=nil, await=nil, util=nil)
@SetId = setid
@SetName = setname
@SetType = settype
@SetSize = setsize
@SetStatus = setstatus
@CreateTime = createtime
@ReadTraffic = readtraffic
@WriteTraffic = writetraffic
@ReadIO = readio
@WriteIO = writeio
@Await = await
@Util = util
end
def deserialize(params)
@SetId = params['SetId']
@SetName = params['SetName']
@SetType = params['SetType']
@SetSize = params['SetSize']
@SetStatus = params['SetStatus']
@CreateTime = params['CreateTime']
unless params['ReadTraffic'].nil?
@ReadTraffic = DetailData.new
@ReadTraffic.deserialize(params['ReadTraffic'])
end
unless params['WriteTraffic'].nil?
@WriteTraffic = DetailData.new
@WriteTraffic.deserialize(params['WriteTraffic'])
end
unless params['ReadIO'].nil?
@ReadIO = DetailData.new
@ReadIO.deserialize(params['ReadIO'])
end
unless params['WriteIO'].nil?
@WriteIO = DetailData.new
@WriteIO.deserialize(params['WriteIO'])
end
unless params['Await'].nil?
@Await = DetailData.new
@Await.deserialize(params['Await'])
end
unless params['Util'].nil?
@Util = DetailData.new
@Util.deserialize(params['Util'])
end
end
end
# 客户站点信息
class Site < TencentCloud::Common::AbstractModel
# @param Name: 站点名称
# @type Name: String
# @param SiteId: 站点id
# @type SiteId: String
# @param Description: 站点描述
# 注意：此字段可能返回 null，表示取不到有效值。
# @type Description: String
# @param CreateTime: 站点创建时间
# @type CreateTime: String
attr_accessor :Name, :SiteId, :Description, :CreateTime
def initialize(name=nil, siteid=nil, description=nil, createtime=nil)
@Name = name
@SiteId = siteid
@Description = description
@CreateTime = createtime
end
def deserialize(params)
@Name = params['Name']
@SiteId = params['SiteId']
@Description = params['Description']
@CreateTime = params['CreateTime']
end
end
# 站点详情
class SiteDetail < TencentCloud::Common::AbstractModel
# @param SiteId: 站点id
# @type SiteId: String
# @param Name: 站点名称
# @type Name: String
# @param Description: 站点描述
# @type Description: String
# @param CreateTime: 站点创建时间
# @type CreateTime: String
# @param FiberType: 光纤类型
# @type FiberType: String
# @param UplinkSpeedGbps: 网络到腾讯云Region区域的上行链路速度
# @type UplinkSpeedGbps: Integer
# @param UplinkCount: 将CDC连接到网络时，每台CDC网络设备(每个机架 2 台设备)使用的上行链路数量。
# @type UplinkCount: Integer
# @param OpticalStandard: 将CDC连接到网络时采用的光学标准
# @type OpticalStandard: String
# @param RedundantNetworking: 是否提供冗余的上游设备(交换机或路由器)，以便两台 网络设备都能连接到网络设备。
# @type RedundantNetworking: Boolean
# @param PowerConnectors: 电源连接器类型
# @type PowerConnectors: String
# @param PowerFeedDrop: 从机架上方还是下方供电。
# @type PowerFeedDrop: String
# @param PowerDrawKva: 功耗(KW)
# @type PowerDrawKva: Float
# @param ConditionRequirement: 是否满足下面环境条件：
# 1、场地没有材料要求或验收标准会影响 CDC 设备配送和安装。
# 2、确定的机架位置包含:
# 温度范围为 41 到 104°F (5 到 40°C)。
# 湿度范围为 10°F (-12°C)和 8% RH (相对湿度)到 70°F(21°C)和 80% RH。
# 机架位置的气流方向为从前向后，且应具有足够的 CFM (每分钟立方英尺)。CFM 必须是 CDC 配置的 kVA 功耗值的 145.8 倍。
# @type ConditionRequirement: Boolean
# @param DimensionRequirement: 是否满足下面的尺寸条件：
# 您的装货站台可以容纳一个机架箱(高 x 宽 x 深 = 94" x 54" x 48")。
# 您可以提供从机架(高 x 宽 x 深 = 80" x 24" x 48")交货地点到机架最终安置位置的明确通道。测量深度时，应包括站台、走廊通道、门、转弯、坡道、货梯，并将其他通道限制考虑在内。
# 在最终的 CDC安置位置，前部间隙可以为 48" 或更大，后部间隙可以为 24" 或更大。
# @type DimensionRequirement: Boolean
# @param MaxWeight: 最大承重(KG)
# @type MaxWeight: Integer
# @param AddressLine: 站点地址
# @type AddressLine: String
# @param OptionalAddressLine: 站点所在地区的详细地址信息（补充）
# @type OptionalAddressLine: String
# @param NeedHelp: 是否需要腾讯云团队协助完成机架支撑工作
# @type NeedHelp: Boolean
# @param BreakerRequirement: 上游断路器是否具备
# @type BreakerRequirement: Boolean
# @param RedundantPower: 是否电源冗余
# @type RedundantPower: Boolean
# @param Country: 站点所在国家
# @type Country: String
# @param Province: 站点所在省份
# @type Province: String
# @param City: 站点所在城市
# @type City: String
# @param PostalCode: 站点所在地区的邮编
# @type PostalCode: Integer
attr_accessor :SiteId, :Name, :Description, :CreateTime, :FiberType, :UplinkSpeedGbps, :UplinkCount, :OpticalStandard, :RedundantNetworking, :PowerConnectors, :PowerFeedDrop, :PowerDrawKva, :ConditionRequirement, :DimensionRequirement, :MaxWeight, :AddressLine, :OptionalAddressLine, :NeedHelp, :BreakerRequirement, :RedundantPower, :Country, :Province, :City, :PostalCode
def initialize(siteid=nil, name=nil, description=nil, createtime=nil, fibertype=nil, uplinkspeedgbps=nil, uplinkcount=nil, opticalstandard=nil, redundantnetworking=nil, powerconnectors=nil, powerfeeddrop=nil, powerdrawkva=nil, conditionrequirement=nil, dimensionrequirement=nil, maxweight=nil, addressline=nil, optionaladdressline=nil, needhelp=nil, breakerrequirement=nil, redundantpower=nil, country=nil, province=nil, city=nil, postalcode=nil)
@SiteId = siteid
@Name = name
@Description = description
@CreateTime = createtime
@FiberType = fibertype
@UplinkSpeedGbps = uplinkspeedgbps
@UplinkCount = uplinkcount
@OpticalStandard = opticalstandard
@RedundantNetworking = redundantnetworking
@PowerConnectors = powerconnectors
@PowerFeedDrop = powerfeeddrop
@PowerDrawKva = powerdrawkva
@ConditionRequirement = conditionrequirement
@DimensionRequirement = dimensionrequirement
@MaxWeight = maxweight
@AddressLine = addressline
@OptionalAddressLine = optionaladdressline
@NeedHelp = needhelp
@BreakerRequirement = breakerrequirement
@RedundantPower = redundantpower
@Country = country
@Province = province
@City = city
@PostalCode = postalcode
end
def deserialize(params)
@SiteId = params['SiteId']
@Name = params['Name']
@Description = params['Description']
@CreateTime = params['CreateTime']
@FiberType = params['FiberType']
@UplinkSpeedGbps = params['UplinkSpeedGbps']
@UplinkCount = params['UplinkCount']
@OpticalStandard = params['OpticalStandard']
@RedundantNetworking = params['RedundantNetworking']
@PowerConnectors = params['PowerConnectors']
@PowerFeedDrop = params['PowerFeedDrop']
@PowerDrawKva = params['PowerDrawKva']
@ConditionRequirement = params['ConditionRequirement']
@DimensionRequirement = params['DimensionRequirement']
@MaxWeight = params['MaxWeight']
@AddressLine = params['AddressLine']
@OptionalAddressLine = params['OptionalAddressLine']
@NeedHelp = params['NeedHelp']
@BreakerRequirement = params['BreakerRequirement']
@RedundantPower = params['RedundantPower']
@Country = params['Country']
@Province = params['Province']
@City = params['City']
@PostalCode = params['PostalCode']
end
end
# VPN网关的流量监控数据。
class VpngwBandwidthData < TencentCloud::Common::AbstractModel
# @param OutBandwidth: 出带宽流量
# 注意：此字段可能返回 null，表示取不到有效值。
# @type OutBandwidth: :class:`Tencentcloud::Cdc.v20201214.models.OutBandwidth`
# @param InBandwidth: 入带宽流量
# @type InBandwidth: :class:`Tencentcloud::Cdc.v20201214.models.InBandwidth`
attr_accessor :OutBandwidth, :InBandwidth
def initialize(outbandwidth=nil, inbandwidth=nil)
@OutBandwidth = outbandwidth
@InBandwidth = inbandwidth
end
def deserialize(params)
unless params['OutBandwidth'].nil?
@OutBandwidth = OutBandwidth.new
@OutBandwidth.deserialize(params['OutBandwidth'])
end
unless params['InBandwidth'].nil?
@InBandwidth = InBandwidth.new
@InBandwidth.deserialize(params['InBandwidth'])
end
end
end
# 可用区信息
class ZoneInfo < TencentCloud::Common::AbstractModel
# @param Zone: 可用区名称
# @type Zone: String
# @param ZoneName: 可用区描述
# @type ZoneName: String
# @param ZoneId: 可用区ID
# @type ZoneId: Integer
# @param ZoneState: 可用区状态，包含AVAILABLE和UNAVAILABLE。AVAILABLE代表可用，UNAVAILABLE代表不可用。
# @type ZoneState: String
attr_accessor :Zone, :ZoneName, :ZoneId, :ZoneState
def initialize(zone=nil, zonename=nil, zoneid=nil, zonestate=nil)
@Zone = zone
@ZoneName = zonename
@ZoneId = zoneid
@ZoneState = zonestate
end
def deserialize(params)
@Zone = params['Zone']
@ZoneName = params['ZoneName']
@ZoneId = params['ZoneId']
@ZoneState = params['ZoneState']
end
end
end
end
end