class Aws::MediaConvert::Types::Eac3AtmosSettings

@see docs.aws.amazon.com/goto/WebAPI/mediaconvert-2017-08-29/Eac3AtmosSettings AWS API Documentation
@return [String]
channels.
surround channel matrix encoded into your left and right surround
Specify whether your input audio has an additional center rear
@!attribute [rw] surround_ex_mode
@return [String]
Otherwise, MediaConvert ignores Stereo downmix.
the default value, Custom for the setting Downmix control.
indicated Related setting: To have MediaConvert use this value, keep
Choose how the service does stereo downmixing. Default value: Not
@!attribute [rw] stereo_downmix
@return [Integer]
loudness as the overall program loudness. Default value: 15%
be speech in order for the encoder to use the measured speech
Specify the percentage of audio content, from 0% to 100%, that must
@!attribute [rw] speech_threshold
@return [Integer]
This value is always 48000. It represents the sample rate in Hz.
@!attribute [rw] sample_rate
@return [String]
Choose how the service meters the loudness of your audio.
@!attribute [rw] metering_mode
@return [Float]
total surround.
Downmix control. Otherwise, the service ignores Left total/Right
use this value, keep the default value, Custom for the setting
you choose for Stereo downmix. Related setting: To have MediaConvert
setting: How the service uses this value depends on the value that
-3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related
this value for downmixing. Default value: -3 dB Valid values: -1.5,
total/Right total surround mix (Lt/Rt surround). MediaConvert uses
Specify a value for the following Dolby Atmos setting: Left
@!attribute [rw] lt_rt_surround_mix_level
@return [Float]
Otherwise, MediaConvert ignores Left total/Right total center.
the default value, Custom for the setting Downmix control.
downmix. Related setting: To have MediaConvert use this value, keep
uses this value depends on the value that you choose for Stereo
0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service
value for downmixing. Default value: -3 dB Valid values: 3.0, 1.5,
total/Right total center mix (Lt/Rt center). MediaConvert uses this
Specify a value for the following Dolby Atmos setting: Left
@!attribute [rw] lt_rt_center_mix_level
@return [Float]
Otherwise, MediaConvert ignores Left only/Right only surround.
the default value, Custom for the setting Downmix control.
downmix. Related setting: To have MediaConvert use this value, keep
uses this value depends on the value that you choose for Stereo
The value -60 mutes the channel. Related setting: How the service
Default value: -3 dB. Valid values: -1.5, -3.0, -4.5, -6.0, and -60.
only/Right only. MediaConvert uses this value for downmixing.
Specify a value for the following Dolby Atmos setting: Left
@!attribute [rw] lo_ro_surround_mix_level
@return [Float]
Otherwise, MediaConvert ignores Left only/Right only center.
the default value, Custom for the setting Downmix control.
downmix. Related setting: To have MediaConvert use this value, keep
uses this value depends on the value that you choose for Stereo
0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service
value for downmixing. Default value: -3 dB. Valid values: 3.0, 1.5,
only/Right only center mix (Lo/Ro center). MediaConvert uses this
Specify a value for the following Dolby Atmos setting: Left
@!attribute [rw] lo_ro_center_mix_level
@return [String]
default values for those settings.
don’t specify values for the related settings, MediaConvert uses
RF. When you keep the value Custom for Dynamic range control and you
values: Dynamic range compression line and Dynamic range compression
settings–Use these settings to specify your dynamic range control
Follow source to use the metadata from your input. Related
provide dynamic range control values in your job settings. Choose
metadata from your input file. Keep the default value, Custom, to
Specify whether MediaConvert should use any dynamic range control
@!attribute [rw] dynamic_range_control
@return [String]
.
Range Control chapter of the Dolby Metadata Guide at
about the Dolby DRC operating modes and profiles, see the Dynamic
MediaConvert ignores Dynamic range compression RF. For information
value, Custom for the setting Dynamic range control. Otherwise,
have MediaConvert use the value you specify here, keep the default
the RF operating mode. Default value: Film light Related setting: To
MediaConvert uses when encoding the metadata in the Dolby stream for
Choose the Dolby dynamic range control (DRC) profile that
@!attribute [rw] dynamic_range_compression_rf
@return [String]
.
the Dynamic Range Control chapter of the Dolby Metadata Guide at
information about the Dolby DRC operating modes and profiles, see
Otherwise, MediaConvert ignores Dynamic range compression line. For
default value, Custom for the setting Dynamic range control.
To have MediaConvert use the value you specify here, keep the
the line operating mode. Default value: Film light Related setting:
MediaConvert uses when encoding the metadata in the Dolby stream for
Choose the Dolby dynamic range control (DRC) profile that
@!attribute [rw] dynamic_range_compression_line
@return [String]
settings, MediaConvert uses default values for those settings.
Downmix control and you don’t specify values for the related
only/Right only center, and Stereo downmix. When you keep Custom for
total/Right total surround, Left total/Right total center, Left
specify your downmix values: Left only/Right only surround, Left
metadata from your input. Related settings–Use these settings to
values in your job settings. Choose Follow source to use the
your input file. Keep the default value, Custom to provide downmix
Specify whether MediaConvert should use any downmix metadata from
@!attribute [rw] downmix_control
@return [String]
dialogue analysis.
Enable Dolby Dialogue Intelligence to adjust loudness based on
@!attribute [rw] dialogue_intelligence
@return [String]
The coding mode for Dolby Digital Plus JOC (Atmos).
@!attribute [rw] coding_mode
@return [String]
A/52-2012 (Annex E).
emits. For more information about the EAC3 bitstream mode, see ATSC
Specify the bitstream mode for the E-AC-3 stream that the encoder
@!attribute [rw] bitstream_mode
@return [Integer]
bitrate to 448k.
input types, MediaConvert automatically increases your output
immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other
448k Note that MediaConvert supports 384k only with channel-based
Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value:
Specify the average bitrate for this output in bits per second.
@!attribute [rw] bitrate
Required when you set Codec to the value EAC3_ATMOS.